Our products : Sale and purchase equipment in Africa - Page 2

Polyethylene or PE is one of the most widely used materials for the construction of underground fluid networks, both for drinking water and gases. Therefore, PE fittings are very important as soon as the characteristics are known and under control (dimensions; pressure; ...).  These PE...

Ductile cast iron flanged connecting pieces allow the connection of both the valve equipment and the flanged pipe (e.g. flanged ductile cast iron pipe).  Complying with international quality and safety norms, Interhydro offers a wide range of flanged cast iron fittings: Ductile iron flanged...

The pressure stabiliser allows the pressure in the water networks to be reduced. Characteristics of the spring pressure stabiliser Material : Cast iron or brass Coating : Epoxy Connection : - Gas thread Ø 1/2 to 1 - Flange 40 to...

It is used for a special drinking water connection on the pressure distribution line. It is installed on the saddle clamp and is used to control the opening and closing of the water underneath the carriageway. Characteristics of the valve Material: Cast iron, brass or...

The anti-hammer relief valve is the equipment used to protect pipes against water hammer caused by the rapid closure of a shut-off device, a pump malfunction or the presence of air. It very quickly relieves the overpressure during a water hammer. Characteristics of the anti-hammer relief...

Water Meter boxes are used to shelter, protect and support the water meter as well as the valves and fittings located before and/or after the water meter. Interhydro provides water meter boxes on many projects such as in Mali and Uganda. Therefore, the company is able to provide a quotation and...

Plunger valve Device allowing to reduce the pressure or to regulate a flow rate with a very high precision and reliability over time. Characteristics of Plunger valve Body : Cast iron Coating : Epoxy DN : 100 to 2000 flanged (other DN on request) PFA 10 to 160...

The air purge valve is a system that allows the evacuation of air at a calibrated flow rate. It allows to limit as much as possible the water hammer at the end of the filling of the pipes. The air purge valve is installed in addition to an air inlet check valve. Characteristics of the Air...

The saddle clamp is used to connect a drinking water network to a customer's connection. It is important to be careful when using it as it is an essential part of the drinking water system.  In this way, the connection to a drinking water network (AEP) means making a connection to a...

The single, double or triple function air relief valve allows: The evacuation of air when filling the pipes Air entry when emptying the pipes (or breakage) Elimination of air pockets during operation Characteristics of air relief valve   Body : Cast iron, brass,...

Interhydro, a specialist in the distribution of drinking water supply equipment in Africa, provides you with a wide range of brass valves. These brass valves are used for sectioning and special drinking water connections. Interhydro is involved in many projects on the African continent, such as...

The air inlet check valve allows air to pass through the duct at a high flow rate during accidental vacuuming or draining. It prevents damage to the pipes and/or the suction of the seals. Characteristics of Air inlet check valve Body: Cast iron Coating : Epoxy DN: 40 to...