Sale of shut-off valve in Africa
SECTIONING & ACCESSORIES
Sectioning materials are used in all distribution networks for water and sewerage. They are used to cut off the pipes and protect them against the flow of fluid.
They can be presented in different forms:
- Resilient seated gate valve
- Flanged butterfly valve
- Swing check valve
Your Interhydro Team is at your disposal for all your needs.
Do not hesitate to contact us through our website or by phone at +33 4 78 33 09 09.
Home page Interhydro >
Our products >
Stop valves and accessories
DI swing check valve for drinking water supply
The easy-to-maintain swing check valve is composed of a disc that swivels on an axle or hinge. As the water pressure increases and the fluid flows through the valve, the disc lifts off its seat. When the pressure decreases, the disc folds down onto its seat and blocks the flow of...
DI flanged resilient seated gate valve for water supply
The gate valve is a material used to control, modify or even stop the flow of a certain liquid such as potable water. It can operate as well in an open canal as on a domestic pipe in a closed environment. The direct passage of this valve allows a full passage of the fluid, with a low pressure...
Butterfly valve with single eccentricity: Flanged; Type WAFER or LUG
Totally waterproof, compact design, easy to use.
These are the three benefits of the single eccentric butterfly valve. They can be flanged, as well as WAFER or LUG type, which are to be inserted between flanges.
These types of butterfly valves can be used on a distribution network, on an...
Double Flanged Double Eccentric Butterfly Valve
As with the flanged gate valve, the butterfly valve is used to shut off a pipeline. By opening the valve, the disc will allow water to flow into the pipe, while in the closed position, it will block the passage of the liquid in question with a complete seal. By using a handwheel for example, the...
Cast iron Y-strainer for drinking water
The Y-strainer is used to protect the pipelines from impurities in the plant. This control device is often placed downstream of the pipe, allowing it to retain all kinds of impurities.
The operating mode is relatively simple. When the fluid containing particles comes into contact with the...